Universeal Rapid All-In-1 stain stop impregnator sealer is a premium solventbased product that offers excellent stain protection against oil and water spills.
The unique formula of Universeal Rapid All-In-1 stain stop can be applied to damp stone and grout immediately after installation. No waiting around, saving time & money with this unique fast track formula. It penetrates to protect polished porcelain and all types of natural stone surfaces, i.e. travertine, terracotta, limestone, marble, granite, sandstone and many other porous stone surfaces against oil and waterbased stains.
Up to 30m2 per litre
This will depend on the porosity of surface. Check the surface after application to ensure full effectiveness of impregnator.
Directions for use:
1. Apply a generous even coat of Universeal Rapid All-In-1 stain stop to the surface and edges of the stone using a solvent resistant sprayer, lint free cloth or brush. Ensure even distribution by wiping over several times, remove any surface sealer that has not penetrated the tile or stone after 15-20 minutes.
2. Apply a second, allowing 30-45 minutes drying between coats, repeat the process and remove any excess sealer from the applied area with a dry lint free cloth. It will take up to 24 hours before the product will offer full protection. Until this has happened, keep the surface free from water and oil spills, as stains may occur before fully cured.
Please Note: Areas not to be sealed must be protected with masking materials. It is strongly recommended when using coloured grouts that a stain test is completed before proceeding.
Up to 20 years Varies depending on the type of surface, wear and correct maintenance procedures.